基于MSP430F5438A的工业排污督察管理终端设计

工业排污占环境污染高达70％,传统水质监测方法效率低且排污企业暗自偷排、突排污水问题严重,为此设计了一款基于MSP430F5438A和北斗的工业排污督察管理终端.工业排污督察管理终端以MSP430F5438A为核心控制器,利用北斗定位模块定位排污口位置并借助水质检测单元实时采集pH值、温度、浑浊度、溶解氧、氨氮浓度等信息,再通过带有注册包和心跳包功能的GPRS通信模块传输数据至监测中心.实现了对分散式工厂排污的实时远程动态监测,提供实时的水质、位置等信息.实际运行表明,终端运行稳定,相对于其他设计,功耗更低,通信更加灵活,更方便,更安全.     

Most Likely Optimal Subsampled Markov Chain Monte Carlo

Journal of Systems Science and Complexity - Markov Chain Monte Carlo (MCMC) requires to evaluate the full data likelihood at different parameter values iteratively and is often computationally...     

Estimation of Partially Linear Panel Data Models with Cross-Sectional Dependence

Journal of Systems Science and Complexity - This paper studies the estimation of the partially linear panel data models, allowing for cross-sectional dependence through a common factors structure....     

Superior corrosion resistance-dependent laser energy density in(CoCrFeNi)95Nb5 high entropy alloy coating fabricated by laser cladding

(CoCrFeNi)95Nb5 high entropy alloy(HEA)coatings were successfully fabricated on a substrate of Q235 steel by laser cladding technology.These(CoCrFeNi)95Nb5 HEA coatings possess excellent properties,particularly corrosion resistance,which is clearly superior to that of some typical bulk HEA and common engineering alloys.In order to obtain appropriate laser cladding preparation process parameters,the effects of laser energy density on the microstructure,microhardness,and corrosion resistance of(CoCrFeNi)95Nb5 HEA coating were closely studied.Results showed that as the laser energy density increases,precipitation of the Laves phase in(CoCrFeNi)95Nb5 HEA coating gradually decreases,and diffusion of the Fe element in the substrate intensifies,affecting the integrity of the(CoCrFeNi)95Nb5 HEA.This decreases the microhardness of(CoCrFeNi)95Nb5 HEA coatings.Moreover,the relative content of Cr2O3,Cr(OH)3,and Nb2O5 in the surface passive film of the coating decreases with increasing energy density,causing corrosion resistance to decrease.This study demonstrates the controllability of a high-performance HEA coating using laser cladding technology,which has significance for the laser cladding preparation of other CoCrFeNi-system HEA coatings.     

数字化创新:回顾与展望

结合数字化创新的特征与发展趋势,基于5W2H的分析思路,本文从数字化创新特征(WHAT)、数字化创新研究时间线(WHEN)、数字化创新场景(WHERE)、数字化创新动因(WHY)、数字化创新参与者(WHO)、数字化创新途径(HOW)以及数字化创新代价(HOW MUCH)七个方面对数字化创新相关文献进行了梳理.研究发现,现有研究缺乏对数字化创新动机、内在机理、影响结果等方面的深度挖掘与分析,未来数字化创新的研究方向应更加关注数字化创新的跨领域研究、数字化创新的跨层次分析、数字化创新的本土化研究、数字生态系统研究等.     

基于长期实测的南京栖霞山长江大桥车辆荷载分析

为准确掌握南京栖霞山长江大桥车辆荷载的统计特性及变化规律,基于该桥动态称重系统记录的2014-2016年数据,研究各车道上不同轴数车辆的分布特点及变化规律,并分析不同轴数车辆各轴轴质量随车质量的变化规律.采用K-means聚类方法对同轴数车辆进行分类,将各类型车辆的轴距、轴质量参数与现行标准进行比较.结果 表明:在大桥所有通行车辆中,二轴车辆为主要类型且所占比例逐年增加,到2016年其通行数量占通行车辆总数的比例为87.42％;5种不同轴数代表车辆中二轴、六轴车辆参数与现行标准相近,与现行标准中三轴、五轴车辆参数相近的车辆不是桥上主要通行车辆类型;各轴数车辆代表轴质量均在轴荷载允许限值内.     

干湿循环和吸力对非饱和下蜀土力学特性影响的试验研究

为研究干湿循环和吸力共同作用对非饱和下蜀土力学特性的影响,选取镇江某边坡的下蜀土为研究对象,通过非饱和直剪试验,对不同干湿循环次数及吸力水平下下蜀土力学特性的变化规律进行了研究.结果 表明:随着干湿循环次数的增加,下蜀土表面裂隙明显增加并具有不可逆性;下蜀土的抗剪强度经短暂增大后逐渐降低,并在第4次干湿循环作用后趋于稳定;下蜀土的黏聚力在经历短暂提高后逐渐降低并趋于稳定,而其内摩擦角则随干湿循环次数的增加变化幅度较小,呈上下波动态势;相同干湿循环次数下,吸力的存在对于下蜀土的黏聚力具有提升作用,而对土体内摩擦角的影响则不明显.研究结果可为干湿循环作用下下蜀土边坡的稳定性分析提供计算参数,具有实际工程意义.     

基于动态阈值的混凝土裂缝高抗噪提取及识别方法

针对表面布有蜂窝麻面等复杂噪声的混凝土裂缝,提出了一种基于动态阈值的混凝土裂缝高抗噪提取方法.首先,通过灰度变换、高斯滤波、信息增强等技术弱化、去除噪声,增强图像中裂缝的亮度,提高裂缝与背景的对比度;然后,采用OTSU阈值分割算法去除伪裂缝,基于裂缝与干扰噪声面积的差异,引入动态阈值,实现各类型裂缝的提取;最后,基于边缘检测和裂缝骨架细化处理,计算裂缝的长度、宽度和面积3项特征参数.基于室内实验和室外实际桥梁拍摄的4组裂缝图像结果表明,4组裂缝的平均宽度分别为2.01、1.07、1.34、0.97 mm,说明该方法适用于不同背景下各类型裂缝的提取,具有较强的鲁棒性.     

Mechanical behavior of a near α titanium alloy under dynamic compression: Characterization and modeling

Dynamic compression tests under strain rates from 870 s^?1 to 2100 s^?1 were conducted for a near α Ti–8Al–1Mo–1V titanium alloy with equiaxed microstructure. Compression behavior, adiabatic shearing and band microstructure were investigated via characterization and calculation. The results demonstrate that all dynamic constitutive curves exhibited obvious stress fluctuation phenomenon with double increase-decrease changing stages at the primary stage of compression. The dislocation multiplication theory can be used to explain this phenomenon. After the stress fluctuation period, work hardening coexisted with the thermal softening, resulting in the slow hardening tendency in constitutive curves. J-C model was utilized to quantify the dynamic constitutive curves. The deviations between the predicted and experimental curves under high strain rates may be attributed to the over-consideration of thermal softening effect in J-C model. Adiabatic shearing band (ASB) began to form under the strain rate of 2100 s^?1. A total shearing strain of 8.1 within ASB achieved in 8.9 μs, corresponding to a local strain rate of about 9.1 × 10⁵ s^?1 and is over 430 times of the macro strain rate. Post annealing was conducted on ASB before EBSD characterization. Due to the static recrystallization during annealing, the α phase within ASB generally presented as ultra-fine grains less than 1 μm in diameter.     

Theoretical and experimental design of Pt-Co(OH)_2 electrocatalyst for efficient HER performance in alkaline solution

Design efficient electrocatalysts become significant for the hydrogen evolution reaction (HER) in alkaline solution.Here,the HER performance on Pt-Co(OH)2 has been investigated by using DFT calculations.Compared with pure Pt,the Pt-Co(OH)2 shows excellent hydrogen binding energy (-0.29 eV) and hydrogen adsorption free energy (0.02 eV).More strikingly,the water dissociation process on Pt-Co(OH)2 is an exothermic reaction while that of Pt is an endothermic reaction,demonstrating that the Pt-Co(OH)_2 is an excellent catalyst for HER in alkaline medium.Then the two-step electrodepositions was used to fabricate Pt-Co(OH)2 on the carbon paper (CP).The Pt-Co(OH)_2/CP shows the lowest overpotential of only 37.6 mV at a current density of 10 mA cm~(-2) in 0.1M KOH,the smallest Tafel slope of58 mV dec~(-1) and the good stability for 20000s without obvious degradation.